Forum
Bildirimler
Hepsini Temizle
Güvenlik Genel
5
Yazılar
2
Üyeler
0
Reactions
870
Görüntüleme
Konu başlatıcı
Merhaba ,
watchguard firebox 700 firewall var elimde bunun ara yüzüne nasıl girebilirim? Com Port ve 3 Ethernert bağlantısı var. Cihaz eski kullanım klavuzu'da yok. Yardımlarınızı rica ederim. Default IP'si vs.
Gönderildi : 07/10/2008 17:35
Selam
Umarım Yardımcı Olur.
Cannot login to configure the Firebox
I am trying to configure a Firebox Edge X 10e for wireless connections. Evidently, the person who first hooked it up used the initial setup wizard found by logging into the device at https://192.168.111.1 .
He does not know what password/user name he put in. So, I did a hard reset of the box and attempted to login through the same 192.168.111.1. I cannot get it to accept the user name/password default.
Searching the net tells me that the default user is blank and the default password is "wg". It DOES not login with this. Blank users and passwords do not work.
I have not used this particular brand, Watchguard Firebox, before. Does pushing the reset button reset the password and such as would doing so on a Linksys or Netgrear router? Or should I do something else to reset it? I've tried what he thinks the password might have been in case it didnt' reset it, but that does not work either, and I have been waiting 45 minutes for tech support to call back and I need to get moving on this.
He does not know what password/user name he put in. So, I did a hard reset of the box and attempted to login through the same 192.168.111.1. I cannot get it to accept the user name/password default.
Searching the net tells me that the default user is blank and the default password is "wg". It DOES not login with this. Blank users and passwords do not work.
I have not used this particular brand, Watchguard Firebox, before. Does pushing the reset button reset the password and such as would doing so on a Linksys or Netgrear router? Or should I do something else to reset it? I've tried what he thinks the password might have been in case it didnt' reset it, but that does not work either, and I have been waiting 45 minutes for tech support to call back and I need to get moving on this.
Watchguard Firebox Optional Network Config?
We've moved to a new building with a new ISP and new external IP range. Moved the Watchguard Firebox to new building and tried changing IP address to new IP range. Internal\Trusted network seems to be working fine (able to browse to internet and send outgoing email), but Optional DMZ seems to be having problems. Our SPAM server sits out there, so there's no incoming email at this point. DNS changes to new MX server have propagated.
Here's our current IP configuration, in case this might be the problem.
Router\Default Gateway: 209.120.193.1
Subnet 255.255.255.128
^^^^^^^^^^^^^^^^^^^
connects to
^^^^^^^^^^^^^^^^^^^^
Cisco 2960 switch 209.120.193.9
^^^^^^^^^^^^^^^^^^^
connects to
^^^^^^^^^^^^^^^^^^^^
WatchGuardFirebox
209.120.193.10
subnet 255.255.255.128
^^^^^^^^^^^^^^^^^^^^
connects to Optional Port
^^^^^^^^^^^^^^^^^^^^
Cisco Catalyst 2950 Switch
209.120.193.15
subnet 255.255.255.128
default gateway 209.120.193.1 (should this be the firebox instead?)
^^^^^^^^^^^^^^^^^^^^^
connects to
^^^^^^^^^^^^^^^^^^^^^
SPAM Server
209.120.193.20
subnet 255.255.255.128
default gateway 209.120.193.1 (should this be the firebox?)
Gönderildi : 07/10/2008 18:21
Konu başlatıcı
Selam
Umarım Yardımcı Olur.
Cannot login to configure the Firebox
I am trying to configure a Firebox Edge X 10e for wireless connections. Evidently, the person who first hooked it up used the initial setup wizard found by logging into the device at https://192.168.111.1 .He does not know what password/user name he put in. So, I did a hard reset of the box and attempted to login through the same 192.168.111.1. I cannot get it to accept the user name/password default.
Searching the net tells me that the default user is blank and the default password is "wg". It DOES not login with this. Blank users and passwords do not work.
I have not used this particular brand, Watchguard Firebox, before. Does pushing the reset button reset the password and such as would doing so on a Linksys or Netgrear router? Or should I do something else to reset it? I've tried what he thinks the password might have been in case it didnt' reset it, but that does not work either, and I have been waiting 45 minutes for tech support to call back and I need to get moving on this.
Watchguard Firebox Optional Network Config?
We've moved to a new building with a new ISP and new external IP range. Moved the Watchguard Firebox to new building and tried changing IP address to new IP range. Internal\Trusted network seems to be working fine (able to browse to internet and send outgoing email), but Optional DMZ seems to be having problems. Our SPAM server sits out there, so there's no incoming email at this point. DNS changes to new MX server have propagated.
Here's our current IP configuration, in case this might be the problem.
Router\Default Gateway: 209.120.193.1
Subnet 255.255.255.128
^^^^^^^^^^^^^^^^^^^
connects to
^^^^^^^^^^^^^^^^^^^^
Cisco 2960 switch 209.120.193.9
^^^^^^^^^^^^^^^^^^^
connects to
^^^^^^^^^^^^^^^^^^^^
WatchGuardFirebox
209.120.193.10
subnet 255.255.255.128
^^^^^^^^^^^^^^^^^^^^
connects to Optional Port
^^^^^^^^^^^^^^^^^^^^
Cisco Catalyst 2950 Switch
209.120.193.15
subnet 255.255.255.128
default gateway 209.120.193.1 (should this be the firebox instead?)
^^^^^^^^^^^^^^^^^^^^^
connects to
^^^^^^^^^^^^^^^^^^^^^
SPAM Server
209.120.193.20
subnet 255.255.255.128
default gateway 209.120.193.1 (should this be the firebox?)
Hocam Selam ,
Yukarıda ki bilgiler işe yaramadı. Sanırım kendi konfig. anlatıyor. Acil yardım lütfen.
Gönderildi : 07/10/2008 18:29
Slm
Kurulum ve yapılandırma ıle ılgılı bır yardım dosyasını asagıdakı adrese upload ettım.
Eger buda yardımcı olmazsa ıcerısınde destek tlf no var arayıp yartdım alabılırsın.
Kolay Gelsın...
http://www.upload.gen.tr/d.php/s2/mve6yh9j/FireboxX_QS_languages_.pdf.html
Gönderildi : 07/10/2008 18:46
