ESX 3.5 de 2008 x-64 CPU problemi

Merhaba,

Virtual Server üzerinden sunucuların(ESX) güncel olup olmadığını kontrol ediniz. Daha sonra sanal sunucuların durumunu kontrol edin. Ayrıca tüm sanallar aynı sorun mu var?

Merhaba;

ServicePack durumu nedir ?

2008'in tüm güncelleştirmeleri yapıldı... ESX 3.5 update 3'ü kuracağım. konu ile kurulumu yapınca bilgi vereceğim. 

updateleri şuan tam ama hala geç açılıyor!!!!

Merhaba;

Peki sistem loglarında her hangibi bir uyarı bir hata yokmu ?

esx  ssh ile login olduktan sonra /var/log/ altındaki logları incelermisin.

Merhaba ;

bu cpu değişikliği ile beraber ram değişikliği yapıyormusunuz acaba , ayrıca bu değişiklikten sonra sıkıntı var ise bunu izlemeniz gerekli 

http://www.veeam.com/vmware-esx-monitoring.html

ayrıca doğru HAL kullandığınıza eminmisiniz , yani 4 cpu ekledikten sonra windows platformunda bunu kontrol ettiniz mi ?

yine bu belirtiler daha çok ram arttırımında oluşur , artan ram vm üzerinde vswp dosyasının büyümesine yol açar ve boot sırasındaki bu dosya da açılışı yavaşlatır , tabiki sizin sorun kapanma ( yani açılışta bir değişiklik olmuyor sadece kapanışta mı oluyor )

birde aşağıdaki gibi logları bizlerle paylaşırsanız yardımcı olmaya çalışalım

son olarak ; yeni bir vm açın 4cpu lu ve eski diskleri bu makineye bağlayın .

ek bilgi için

http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1004901&sliceId=1&docTypeID=DT_KB_1_1&dialogID=8036602&stateId=1%200%208038533

May 06 18:02:50.221: vcpu-1| Guest: toolbox: Got a logoff event.
May 06 18:02:50.247: vcpu-1| GuestRpc: Channel 1 reinitialized.
May 06 18:02:51.353: vcpu-1| Guest: toolbox: Got a logoff event.
May 06 18:02:52.802: vcpu-1| Guest: toolbox: VMware Tools Service Shutdown.
May 06 18:02:52.803: vcpu-1| Guest: toolbox: VMware Tools Service Stopping.
May 06 18:02:52.838: vcpu-0| TOOLS autoupgrade protocol version 0
May 06 18:02:52.840: vcpu-0| TOOLS ToolsCapabilityGuestTempDirectory received 0
May 06 18:02:52.841: vcpu-0| GuestRpc: Channel 0 reinitialized.
May 06 18:02:52.845: vcpu-1| Guest: toolbox: Service: waiting for GuestInfoServer thread.
May 06 18:02:52.845: vcpu-0| Guest: toolbox: GuestInfoServer received quit event.
May 06 18:02:52.846: vcpu-0| Guest: toolbox: GuestInfoServer exiting.
May 06 18:02:52.846: vcpu-1| Guest: toolbox: Service: GuestInfoServer thread exited.
May 06 18:03:17.933: vcpu-0| VMMouse: CMD Disable
May 06 18:03:17.933: vcpu-0| VMMouse: Disabling VMMouse mode
May 06 18:03:17.933: vcpu-0| MKS switching absolute mouse on
May 06 18:03:17.953: vcpu-1| CPU reset: soft
May 06 18:03:17.953: vcpu-0| CPU reset: soft
May 06 18:03:18.098: mks| VNCENCODE 6 encoding mode change: (640x480x16depth,16bpp)
May 06 18:03:18.103: mks| VNCENCODE 7 encoding mode change: (640x480x16depth,16bpp)
May 06 18:03:18.120: vcpu-1| CPU reset: soft
May 06 18:03:18.131: vcpu-0| SVGA: Unregistering IOSpace at 0x1060
May 06 18:03:18.131: vcpu-0| SVGA: Unregistering MemSpace at 0xf8000000(0xf8000000) and 0xf4000000(0xf4000000)
May 06 18:03:18.266: vcpu-0| SVGA: Registering MemSpace at 0xf8000000(0xf8000000) and 0xf4000000(0xf4000000)
May 06 18:03:18.287: vcpu-0| SVGA: Unregistering MemSpace at 0xf8000000(0xf8000000) and 0xf4000000(0xf4000000)
May 06 18:03:18.607: vcpu-0| SVGA: Registering MemSpace at 0xf8000000(0xf8000000) and 0xf4000000(0xf4000000)
May 06 18:03:18.634: vcpu-0| SVGA: Unregistering MemSpace at 0xf8000000(0xf8000000) and 0xf4000000(0xf4000000)
May 06 18:03:18.637: vcpu-0| SVGA: Registering IOSpace at 0x1060
May 06 18:03:18.637: vcpu-0| SVGA: Registering MemSpace at 0xf8000000(0xf8000000) and 0xf4000000(0xf4000000)
May 06 18:03:18.664: vcpu-1| CPU reset: soft
May 06 18:03:18.688: mks| VNCENCODE 7 encoding mode change: (720x400x16depth,16bpp)
May 06 18:03:18.688: mks| VNCENCODE 6 encoding mode change: (720x400x16depth,16bpp)
May 06 18:03:18.809: mks| VNCENCODE 6 encoding mode change: (640x480x16depth,16bpp)
May 06 18:03:18.818: mks| VNCENCODE 7 encoding mode change: (640x480x16depth,16bpp)
May 06 18:03:18.821: vcpu-0| SIO: Skipping bogus enable for COM1
May 06 18:03:18.822: vcpu-0| SIO: Skipping bogus enable for COM2
May 06 18:03:18.887: vcpu-0| DISKUTIL: scsi0:0 : geometry=5221/255/63
May 06 18:03:18.917: vcpu-0| DISKUTIL: scsi1:0 : geometry=525/255/63
May 06 18:03:18.917: vcpu-0| DISKUTIL: scsi1:1 : geometry=7314/255/63
May 06 18:03:19.591: vcpu-1| CPU reset: soft
May 06 18:03:19.609: vcpu-0| BIOS-UUID is 50 04 09 e1 33 cf 5c 85-6b 21 7c b9 f6 c2 0e b7
May 06 18:03:20.024: vcpu-0| DISKUTIL: scsi1:1 : toolsVersion = 7300
May 06 18:03:20.024: vcpu-0| DISKUTIL: scsi1:0 : toolsVersion = 7300
May 06 18:03:20.024: vcpu-0| DISKUTIL: scsi0:0 : toolsVersion = 7300
May 06 18:03:20.024: vcpu-0| DISKUTIL: scsi1:1 : toolsVersion = 7300
May 06 18:03:20.024: vcpu-0| DISKUTIL: scsi1:0 : toolsVersion = 7300
May 06 18:03:20.024: vcpu-0| DISKUTIL: scsi0:0 : toolsVersion = 7300
May 06 18:03:20.030: mks| VNCENCODE 7 encoding mode change: (720x400x16depth,16bpp)
May 06 18:03:20.030: mks| VNCENCODE 6 encoding mode change: (720x400x16depth,16bpp)
May 06 18:03:20.303: vcpu-0| Unknown int 10h func 0x2000
May 06 18:03:38.792: mks| VNCENCODE 7 encoding mode change: (640x480x16depth,16bpp)
May 06 18:03:38.792: mks| VNCENCODE 6 encoding mode change: (640x480x16depth,16bpp)
May 06 18:03:39.164: vcpu-1| CPU reset: soft
May 06 18:03:41.090: vcpu-0| SVGA: Unregistering IOSpace at 0x1060
May 06 18:03:41.090: vcpu-0| SVGA: Unregistering MemSpace at 0xf8000000(0xf8000000) and 0xf4000000(0xf4000000)
May 06 18:03:41.095: vcpu-0| SVGA: Registering IOSpace at 0x1060
May 06 18:03:41.096: vcpu-0| SVGA: Registering MemSpace at 0xf8000000(0xf8000000) and 0xf4000000(0xf4000000)
May 06 18:17:33.227: vcpu-0| SVGA: Unregistering IOSpace at 0x1060
May 06 18:17:33.228: vcpu-0| SVGA: Unregistering MemSpace at 0xf8000000(0xf8000000) and 0xf4000000(0xf4000000)
May 06 18:17:33.230: vcpu-0| SVGA: Registering IOSpace at 0x1060
May 06 18:17:33.231: vcpu-0| SVGA: Registering MemSpace at 0xf8000000(0xf8000000) and 0xf4000000(0xf4000000)
May 06 18:17:36.401: mks| VNCENCODE 7 encoding mode change: (800x600x16depth,16bpp)
May 06 18:17:36.401: mks| VNCENCODE 6 encoding mode change: (800x600x16depth,16bpp)
May 06 18:17:38.273: vcpu-0| Balloon: Start: vmmemctl reset balloon
May 06 18:17:38.273: vcpu-0| Balloon: Reset (n=2 pages=0)
May 06 18:17:38.273: vcpu-0| Balloon: Reset: nUnlocked=0 (size=0)
May 06 18:17:41.952: mks| MKS remote display status changed, enabling remote optimizations
May 06 18:17:42.778: vcpu-0| GuestRpc: Channel 0, registration number 1, guest application toolbox.
May 06 18:17:42.779: vcpu-0| DISKUTIL: scsi1:1 : toolsVersion = 7300
May 06 18:17:42.779: vcpu-0| DISKUTIL: scsi1:0 : toolsVersion = 7300
May 06 18:17:42.779: vcpu-0| DISKUTIL: scsi0:0 : toolsVersion = 7300
May 06 18:17:42.784: vcpu-0| TOOLS autoupgrade protocol version 2
May 06 18:17:42.800: vcpu-0| TOOLS ToolsCapabilityGuestTempDirectory received 1 C:\WINNT\TEMP
May 06 18:17:42.800: vcpu-0| TOOLS setting the tools version to '7300'
May 06 18:17:42.848: vcpu-0| TOOLS soft reset detected.
May 06 18:17:42.848: vcpu-0| DISKUTIL: scsi1:1 : toolsVersion = 7300
May 06 18:17:42.848: vcpu-0| DISKUTIL: scsi1:0 : toolsVersion = 7300
May 06 18:17:42.848: vcpu-0| DISKUTIL: scsi0:0 : toolsVersion = 7300
May 06 18:17:42.848: vcpu-0| TOOLS installed version 7300, available version 7300
May 06 18:17:42.848: vcpu-0| TOOLS don't need to be upgraded.
May 06 18:17:42.942: vcpu-0| Guest: toolbox: Version: build-82663
May 06 18:17:42.943: vcpu-0| TOOLS unified loop capability requested by 'toolbox'; now sending options via TCLO
May 06 18:19:07.004: vcpu-0| VMMouse: CMD Read ID
May 06 18:19:07.004: vcpu-0| MKS switching absolute mouse on
May 06 18:19:16.329: vcpu-0| TOOLS unified loop capability requested by 'toolbox-dnd'; now sending options via TCLO
May 06 18:19:16.329: vcpu-0| GuestRpc: Channel 1, registration number 1, guest application toolbox-dnd.
May 06 18:19:16.329: vcpu-0| DISKUTIL: scsi1:1 : toolsVersion = 7300
May 06 18:19:16.329: vcpu-0| DISKUTIL: scsi1:0 : toolsVersion = 7300
May 06 18:19:16.329: vcpu-0| DISKUTIL: scsi0:0 : toolsVersion = 7300
May 06 18:50:51.004: vcpu-1| TOOLS unified loop capability requested by 'toolbox-ui'; now sending options via TCLO
May 06 18:50:51.004: vcpu-1| GuestRpc: Channel 3, registration number 1, guest application toolbox-ui.
May 06 18:50:51.004: vcpu-1| DISKUTIL: scsi1:1 : toolsVersion = 7300
May 06 18:50:51.004: vcpu-1| DISKUTIL: scsi1:0 : toolsVersion = 7300
May 06 18:50:51.004: vcpu-1| DISKUTIL: scsi0:0 : toolsVersion = 7300
May 06 18:50:51.011: vcpu-1| TOOLS unified loop capability requested by 'toolbox-ui'; now sending options via TCLO
May 06 18:50:51.012: vcpu-1| GuestRpc: Channel 2, conflict: guest
application toolbox-ui tried to register, but it is still registered on
channel 3
May 06 18:50:51.012: vcpu-1| GuestRpc: Channel 2 reinitialized.
May 06 18:50:51.012: vcpu-1| GuestRpc: Channel 2 reinitialized.
May 06 18:50:54.419: vcpu-1| GuestRpc: Channel 3 reinitialized.
May 06 19:29:01.900: mks| SOCKET 7 recv error 110: Connection timed out
May 06 19:29:01.900: mks| SOCKET 7 destroying VNC backend on socket error: 110
May 06 19:29:02.208: mks| SOCKET 6 recv error 110: Connection timed out
May 06 19:29:02.208: mks| SOCKET 6 destroying VNC backend on socket error: 110
May 06 19:54:09.792: vcpu-1| Guest: toolbox: Got a logoff event.
May 06 19:54:09.821: vcpu-1| GuestRpc: Channel 1 reinitialized.
May 06 19:54:10.858: vcpu-0| Guest: toolbox: Got a logoff event.
May 06 19:54:13.296: mks| SOCKET 8 recv error 5: Input/output error 

Merhaba Hakan Bey, 

Server'a 1 vCPU  ve 1 GB RAM verilerek RAM değeri 1 GB'lık artışlarla 10 GB değere kadar getirilerek tüm sonuçlar gözlemlendi. 1 vCPU ve 10 GB RAM restart süresi normal, herhangi bir problem yok. Ama CPU sayısı 2 yapınca süre uzadı hatta 4 yapınca açılış hemen hemen 10 dakika sürüyordu (süre tutmadım ama:))

http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1004901&sliceId=1&docTypeID=DT_KB_1_1&dialogID=8036602&stateId=1%200%208038533

Gönderdiğiniz bu linkdeki aşağıdaki adımları uyguladım 1,5 dakikada restart ediyor..(kapanmada problem başlangıçda da yoktu açılış uzun sürüyordu.)  Linkde de yazdığı gibi bu problemi ESX 4 de gidermek için çalışıyorlarmış.

Herkese teşekkür ederim, yeni problemlerde görüşürüz:)

To disable page sharing on the ESX Server:

1. 
   
   Log in to VirtualCenter (or the ESX Server directly) with an administrative account using the VMware Infrastructure Client.
   
   
2. 
   
   Click on the ESX Server that you want to disable page sharing on.
   
   
3. 
   
   Click the Configuration tab.
   
   
4. 
   
   Click the Advanced Settings link.
   
   
5. 
   
   Click Mem in the Advanced Settings window.
   
   
6. 
   
   Look for the Mem.ShareScanGHz option and set the value to 0 .
   
   Note: By default Mem.ShareScanGHz is set to 4 .
   
   
   
   
7. 
   
   Click OK.
   
   
8. 
   
   Reboot the ESX host.

geri dönüş ve bilgi için teşekkürler Mehmet bey .

geçmiş olsun .