Virtual Box üzerinde KaliLinux network Bridge çalışmıyor

Windows 10 üzerinde VirtualBox Version 5.2.22 r126460 (Qt5.6.2) kurulu ve bunun üzerinde ise Kali Linux kurulu. Kali linux için network adaptoru NAT durumda iken internete erişim var. Network detayı aşağıda ki gibidir. 

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.2.15 netmask 255.255.255.0 broadcast 10.0.2.255
ether 08:00:27:74:17:d4 txqueuelen 1000 (Ethernet)
RX packets 54 bytes 28289 (27.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 102 bytes 16952 (16.5 KiB)
TX errors 1 dropped 0 overruns 0 carrier 1 collisions 0
device interrupt 19 base 0xd020

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 2891 bytes 6098192 (5.8 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2891 bytes 6098192 (5.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

Bununla birlikte bu KaliLinux için Virtual Box da makineninnetwork adaptorunu Bridge olarak set ettiğimde ise malesef Fiziksel ağdaki IP adreslerini alamamakta ve hiçbir ağ veya internete erişememektedir. Bridge modun Kali Linuxde çalışması için ne yapmam gerekiyor?

Bridge modda ki ayarlar aşağıda ki gibidir.

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 08:00:27:74:17:d4 txqueuelen 1000 (Ethernet)
RX packets 54 bytes 28289 (27.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 105 bytes 18320 (17.8 KiB)
TX errors 2 dropped 0 overruns 0 carrier 2 collisions 0
device interrupt 19 base 0xd020

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 3881 bytes 6453635 (6.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3881 bytes 6453635 (6.1 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0