server alırken nelere dikkat etmeli ve nasıl seçim yapılmalı

Markaya dikkat etmelisiniz, markaların teknik servisi çok önemli. Bir
de kullanacağınız uygulamaya göre model seçimi. Kullanıcı sayısına göre
mesela.

öncelikle server alırken dikkat edilmesi gereken husular vardır bunlardan en önemlisi server ı ne amaçla kullanacagınızdır

piyasada  genelde 3-4 çeşit server tipi vardır ve firmalar tarafından kullanılır

a-storage server

b-workstation server

c-normal server

genel kategorize bu şekildedir ama sizin için yapılacak 3-4 şey vardır 

1.olarak ne amaçla kullanıcagınızı detaylı bir rapor haline getirmeniz alıcagınız server için işin püf noktasını oluşturabilir

2.olarak piyasada bulunan lider server satışı yapan firmalarin web sitelerini ziyaret edip ürünler hakkında bilgi toplayınız (IBM,HP,DELL)

2.olarak server satan firmalarla (teknik destek yerleri ile )görüşüp raporunuzu gönderiniz 

3.olarak server konusunda 1 den fazla seçeneginiz varsa piyasada bulunan bu konuda lider olan  firmalardan teklif alınız en uygun fiyat en yüksek performans doğrultusunda server alımı yapınız

slm en iyisimi sen ihtiyaclarını belirledikten sonra bu sorunun cevabını ara

IBM X 3400

giriş seviyesi (aldanmayın ortalama 200 User' a kadar yetmektedir) bir server olup redundancy özellikleri (disk, fan,power supply vb..) hata şansınıda minimize edilmiştir..

ihtiyaçlar paylaşılırsa doğru bir yönlendirme yapabiliriz.

[img] [/img]

Features and Specifications - 7973 & 7974, 7975 and 7976

Microprocessor:

Models 7973 & 7974

• Supports up to two Intel® Xeon® dual-core processors
• 4 MB shared Level-2 cache
• 667, 1066, or 1333 MHz front-side bus (FSB)

Models 7975 & 7976

• Supports up to two Intel® Xeon® dual-core processors or two Intel quad-core processors
• Important: Do not mix dual-core processors and quad-core processors in the same server.
• 4 MB shared Level-2 cache
• 667, 1066, or 1333 MHz front-side bus (FSB)

Note: Use the Configuration/Setup Utility program to determine the type and speed of the microprocessors.

Memory:

All Models

• Minimum: 1 GB
• Maximum: 32 GB (16 GB in mirrored mode)
• Types: PC2-5300, ECC fully-buffered with double-data-rate 2 (DDR2)
• Connectors: eight dual inline memory module (DIMM) connectors, two-way interleaved

Drives (depending on the model):

Models 7973 & 7974

• Diskette (optional): External USB diskette drive
• Hard disk drive: SATA
• One of the following IDE drives:
  • CD-ROM
  • CD-RW (optional)
  • DVD-ROM (optional)
  • DVD-ROM/CD-RW (optional)

Models 7975 & 7976

• Diskette (optional): External USB diskette drive
• Hard disk drive: SATA or SAS
• One of the following IDE drives:
  • CD-ROM
  • CD-RW (optional)
  • DVD-ROM (optional)
  • DVD-ROM/CD-RW (optional)

Drive bays (depending on the model):

Models 7973 & 7974

• Three half-high 5.25-in. bays (one CD or DVD drive installed) or one half-high CD or DVD drive and one full-high tape drive
• Four 3.5-in. simple-swap bays

Models 7975 & 7976

• Three half-high 5.25-in. bays (one CD or DVD drive installed) or one half-high CD or DVD drive and one full-high tape drive
• Eight 3.5-in. hot-swap hard disk drive bays

  Note: You can install up to eight hot-swap drives when you order the 4-drive backplane option kit.

Expansion slots (depending on the model):

All Models

• Six expansion slots
  • Three PCI Express x8 slots (two x8 links and one x4 link)
  • One PCI 32-bit/33 MHz slot
  • Two PCI-X 64-bit/133 MHz slots

Fans:

Models 7973 & 7974

• Three speed-controlled hot-swap fans

Models 7975 & 7976

• Three speed-control hot-swap fans (standard)

  Note: Six fans are required to provide redundancy in hot-swap models; therefore, you must install an additional redundant power and cooling option kit (the option kit comes with a hot-swap power supply and three hot-swap fans) to upgrade to redundant mode.

Power supply:

Models 7973 & 7974

• 670 watt (90-240 V ac)

Models 7975 & 7976

One of the following power supplies:

• One nonredundant 670 watt (90-240 V ac)
• One 835 watt (90-240 V ac)

  Note: Two 835 watt power supplies provide redundancy in hot-swap models; therefore, you must install an additional redundant power and cooling option kit (the option kit comes with an 835 watt hot-swap power supply and three hot-swap fans) to upgrade to redundant mode.

Size:

All Models

• Height: 440 mm (17.3 in.)
• Depth: 747 mm (29.4 in.)
• Width: 218 mm (8.6 in.)
• Weight: 20 kg (42 lb) to 34 kg (75 lb) depending upon configuration

Integrated functions:

Models 7973 & 7974

• Baseboard management controller (BMC) or onboard service processor
• Broadcom 5721 10/100/1000 Ethernet controller on the system board with RJ-45 Ethernet port
• Six-port, Serial ATA controller v Integrated RAID capability (SATA HostRAID)
• Remote Supervisor Adapter II SlimLine
• Two serial ports
• One parallel port
• Four Universal Serial Bus (USB) v2.0 ports (two on front and two on rear)
• Keyboard port
• Mouse port
• ATA-100 single-channel IDE controller (bus mastering)
• ATI ES1000 video controller
  • Compatible with SVGA and VGA
  • 16 MB SDRAM video memory

Models 7975 & 7976

• Baseboard management controller (BMC) or onboard service processor
• Broadcom 5721 10/100/1000 Ethernet controller on the system board with RJ-45 Ethernet port
• Dual-channel (four ports per channel) onboard SAS/SATA controller with integrated RAID
• Six-port, Serial ATA controller v Integrated RAID capability (SATA HostRAID)
• Remote Supervisor Adapter II SlimLine
• Two serial ports
• One parallel port
• Four Universal Serial Bus (USB) v2.0 ports (two on front and two on rear)
• Keyboard port
• Mouse port
• ATA-100 single-channel IDE controller (bus mastering)
• ATI ES1000 video controller
  • Compatible with SVGA and VGA
  • 16 MB SDRAM video memory

Diagnostic LEDs:

Models 7973 & 7974

• Fans
• Memory
• Power supply

Models 7975 & 7976

• Fans
• Memory
• Hard disk drives (redundant models)
• Power supply

Acoustical noise emissions:

Models 7973 & 7974

• Sound power, idling: 5.6 bel
• Sound power, operating: 6.0 bel

Models 7975 & 7976

• Sound power, idling: 5.6 bel or 6.0 bel
• Sound power, operating: 6.0 bel or6.1 bel

Environment:

All Models

• Air temperature:
  • Server on: 10° to 35°C (50° to 95°F) Altitude: 0 to 914 m (2998.0 ft)
  • Server off: -40° to 60°C (-40° to 140°F) Altitude: 0 to 2133 m (7000.0 ft)
• Humidity (operating and storage): 8% to 80%

Heat output:

Models 7973 & 7974

Approximate heat output in British thermal units (Btu) per hour:

• Minimum configuration: 693 Btu per hour (203 watts)
• Maximum configuration: 1631 Btu per hour (478 watts)

Models 7975 & 7976

Approximate heat output in British thermal units (Btu) per hour:

• Minimum configuration: 781 Btu per hour (229 watts)
• Maximum configuration: 1910 Btu per hour (560 watts)

Electrical input:

Models 7973 & 7974

• Sine-wave input (50 or 60 Hz) required
• Input voltage and frequency ranges automatically selected
• Input voltage low range:
  • Minimum: 100 V ac
  • Maximum: 127 V acv
• Input voltage high range:
  • Minimum: 200 V ac
  • Maximum: 240 V acv
• Input kilovolt-amperes (kVA) approximately:
  • Minimum: 0.21 kVA (all models)
  • Maximum: 0.49 kVA

Models 7975 & 7976

• Sine-wave input (50 or 60 Hz) required
• Input voltage and frequency ranges automatically selected
• Input voltage low range:
  • Minimum: 100 V ac
  • Maximum: 127 V acv
• Input voltage high range:
  • Minimum: 200 V ac
  • Maximum: 240 V acv
• Input kilovolt-amperes (kVA) approximately:
  • Minimum: 0.23 kVA (all models)
  • Maximum: 0.57 kVA

Notes:

1. Power consumption and heat output vary depending on the number and type of optional features installed and the power-management optional features in use.

2. These levels were measured in controlled acoustical environments according to the procedures specified by the American National Standards Institute (ANSI) S12.10 and ISO 7779 and are reported in accordance with ISO 9296. Actual sound-pressure levels in a given location might exceed the average values stated because of room reflections and other nearby noise sources. The declared sound-power levels indicate an upper limit, below which a large number of computers will operate.

Operating systems supported: (always verify OS support in ServerProven)

All Models

• Microsoft Windows Server 2003/2003 R2 Standard x64 Edition
• Microsoft Windows Server 2003/2003 R2 Standard Edition
• Microsoft Windows Server 2003/2003 Web Edition
• Microsoft Windows Server 2003/2003 R2 Enterprise Edition
• Microsoft Windows Server 2003/2003 R2 Enterprise x64 Edition
• Microsoft Windows Server 2003/2003 Ent. Ed. w/Microsoft Cluster Service (MSCS)
• Microsoft Windows 2003/2003 Ent. Ed.(64 bit) w/Microsoft Cluster Service (MSCS)
• Microsoft Windows Small Business Server 2003/2003 R2 Premium Edition
• Microsoft Windows 2000 Server
• Microsoft Windows 2000 Advanced Server
• NetWare 6.5
• SUSE LINUX Enterprise Server 10 for AMD64/EM64T
• SUSE LINUX Enterprise Server 10 for x86
• SUSE LINUXenterprise Server 9 for AMD64/EM64T
• SUSE LINUX Enterprise Server 9 for x86
• Red Hat Enterprise Linux 4 AS for AMD64/EM64T
• Red Hat Enterprise Linux 4 AS for x86
• Red Hat Enterprise Linux 4 ES for AMD64/EM64T
• Red Hat Enterprise Linux 4 ES for x86
• Red Hat Enterprise Linux 4 WS for AMD64/EM64T
• Red Hat Enterprise Linux 4 WS for x86
• Red Hat Enterprise Linux 3 AS for AMD64/EM64T
• Red Hat Enterprise Linux 3 AS for x86
• Red Hat Enterprise Linux 3 ES for AMD64/EM64T
• Red Hat Enterprise Linux 3 ES for x86
• Red Hat Enterprise Linux 3 WS for AMD64/EM64T
• Red Hat Enterprise Linux 3 WS for x86
• SCO UnixWare 7.1.4

 

Limited warranty:

• 7973 & 7975 - 1 year on-site limited warranty
• 7974 & 7976 - 3 year on-site limited warranty

Merhabalar

Post eski ama 2 aydır server alımı ile uğraştığım için hala bu konuda bilgi edinmek istiyorsanız yardımcı olaiblirim ayrıntılı bir şekilde.

Saygılar.

Çok basit ihtiyaca göre :::))