Cisco 2821 Pri Bri cevirimi video konferans icin.

Merhaba ;

Bu işlemini yapabilirsin ama telekomdan aldıgın hat yetersiz kalabilir , b,z bu işi 10 mgbit hatla yapıyoruz yinede görüntü bozuk oluyor ama yinede denemeni tavsiye ederim ..

http://www.turevbilisim.com.tr/Polycom/

bu siteyi arayıp teknik yardım alabilirsiniz....

merhaba arkadaşım

gönderdiğin resim bende gözükmüyor. buraya güncellersen bu kouda yardımcı olabilrim sanırım. daha önce böyle bi bağlantı yapmıştım.

Forumumuza resim eklemek kısmı daha önceden konuşulmuştu.Buraya tıklayarak postta ulaşabilrisiniz.

Resimdeki bozuluk icin ozurdilerim duzelttim simdi .

 

Bu bri hatti test etmenin basit bi yontemi varmidir. ?

 

Pri to Bri icin yaptigin konfig su sekilde

 

interface Serial0/3/0:15
 no ip address
 encapsulation hdlc
 isdn switch-type primary-net5
 isdn incoming-voice voice
 isdn calling-number   xxx tel no xxxxx
 no cdp enable

 

interface BRI2/0
 no ip address
 encapsulation hdlc
 isdn switch-type basic-net3
 isdn protocol-emulate network
 isdn tei-negotiation first-call
 isdn incoming-voice voice
 isdn skipsend-idverify
!
interface BRI2/1
 no ip address
 encapsulation hdlc
 isdn switch-type basic-net3
 isdn protocol-emulate network
 isdn tei-negotiation first-call
 isdn incoming-voice voice
 isdn skipsend-idverify
!
interface BRI2/2
 no ip address
 encapsulation hdlc
 isdn switch-type basic-net3
 isdn protocol-emulate network
 isdn tei-negotiation first-call
 isdn incoming-voice voice
 isdn skipsend-idverify
!
interface BRI2/3
 no ip address
 encapsulation hdlc
 isdn switch-type basic-net3
 isdn protocol-emulate network
 isdn tei-negotiation first-call
 isdn incoming-voice voice
 isdn skipsend-idverify

 

voice-port 0/1/0
 compand-type a-law
 timing hookflash-out 50
 description - corresponds to int BRI 2/0
!
voice-port 0/1/1
 compand-type a-law
 description - corresponds to int BRI 2/1
!
voice-port 0/1/2
 compand-type a-law
 description - corresponds to int BRI 2/2
!
voice-port 0/1/3
 compand-type a-law
 description - corresponds to int BRI 2/3

 

!
dial-peer voice 5 pots
 description - enable DID on PRI voice port 0/3/0:15
 incoming called-number .
 direct-inward-dial
 port 0/3/0:15
!
dial-peer voice 6 pots
 description - enable DID on BRI voice port 0/1/0
 incoming called-number .
 direct-inward-dial
 port 0/1/0
!
dial-peer voice 7 pots
 description - enable DID on BRI voice port 0/1/1
 incoming called-number .
 direct-inward-dial
 port 0/1/1
!
dial-peer voice 8 pots
 description - enable DID on BRI voice port 0/1/2
 incoming called-number .
 direct-inward-dial
 port 0/1/2
!
dial-peer voice 9 pots
 description - enable DID on BRI voice port 0/1/3
 incoming called-number .
 direct-inward-dial
 port 0/1/3
!
dial-peer voice 10 pots
 description - outwards call to BRI voice port 0/1/0
 preference 1
 destination-pattern xxx tel no xxxxx[0-9]
 port 0/1/0
 forward-digits all
!
dial-peer voice 11 pots
 description - outwards call to BRI voice port 0/1/1
 preference 2
 destination-pattern xxx tel no xxxxx[0-9]
 port 0/1/1
 forward-digits all
!
dial-peer voice 12 pots
 description - outwards call to BRI voice port 0/1/2
 preference 3
 destination-pattern xxx tel no xxxxx[0-9]
 port 0/1/2
 forward-digits all
!
dial-peer voice 13 pots
 description - outwards call to BRI voice port 0/1/3
 preference 3
 destination-pattern xxx tel no xxxxx[0-9]
 port 0/1/3
 forward-digits all
!
dial-peer voice 20 pots
 description - outgoing calls towards PRI. Leading 0 access code is
 destination-pattern 0
 port 0/3/0:15

 

 

 

 

 

Sh ip int brief ciktisi icin 

BRI2/0                     unassigned      YES manual up                    up     
BRI2/0:1                   unassigned      YES unset  down                  down   
BRI2/0:2                   unassigned      YES unset  down                  down   
BRI2/1                     unassigned      YES manual up                    up     
BRI2/1:1                   unassigned      YES unset  down                  down   
BRI2/1:2                   unassigned      YES unset  down                  down   
BRI2/2                     unassigned      YES manual up                    up     
BRI2/2:1                   unassigned      YES unset  down                  down   
BRI2/2:2                   unassigned      YES unset  down                  down   
BRI2/3                     unassigned      YES manual up                    up     
BRI2/3:1                   unassigned      YES unset  down                  down   
BRI2/3:2                   unassigned      YES unset  down                  down