ÇözümPark

Çözümsüz Sorunuz Kalmasın.
ÇözümPark'a hoş geldiniz. Oturum Aç | Üye Ol
in ARA
Ana Sayfa Makaleler Forumlar Resimler Dosyalar Online Destek Biz Kimiz? İletişim

Cisco 878 K-9 Port Forwarding on GHSDSL..!

Son Mesajınız 04-10-2008, 17:36 Fatih SERT tarafından gönderildi. 3 yanıt.
Mesajları Sırala: Önceki Sonraki
  •  04-08-2008, 17:05 11007

    Cisco 878 K-9 Port Forwarding on GHSDSL..!

    Merhabalar;

     Elinizde GHSDSL 878 K-9 için konfigurasyon war mıdır? Sadece internete çıkacak ve arka taraftaki windows 2003 ent. üzerinde vpn server aut. yapacak..yani port forwarding..!

     

    tşkler

  •  04-09-2008, 12:31 11200 Cevap 11007

    Cevap : Cisco 878 K-9 Port Forwarding on GHSDSL..!

    selam , aşagidaki conf ile cihazi internete cikarabilirsin XXXX leri kendine gore ayarlarsin .

     

    sh run
    Building configuration...

    Current configuration : 4371 bytes
    !
    version 12.4
    no service pad
    service tcp-keepalives-in
    service tcp-keepalives-out
    service timestamps debug datetime msec localtime show-timezone
    service timestamps log datetime msec localtime show-timezone
    service password-encryption
    service sequence-numbers
    !
    hostname internet
    !
    boot-start-marker
    boot-end-marker
    !
    logging buffered 51200 debugging
    logging console critical
    enable secret 5 xxxxxxxxxx
    !
    no aaa new-model
    !
    resource policy
    !
    ip subnet-zero
    no ip source-route
    ip cef
    !
    !
    ip tcp synwait-time 10
    no ip bootp server
    ip domain name yourdomain.com
    ip name-server 213.243.1.40
    ip ssh time-out 60
    ip ssh authentication-retries 2
    !
    !
    crypto pki trustpoint TP-self-signed-377859389
     enrollment selfsigned
     subject-name cn=IOS-Self-Signed-Certificate-377859389
     revocation-check none
     rsakeypair TP-self-signed-377859389
    !
    !
    username xxxxx privilege 15 secret 5 xxxxxxxxxx
    !
    !
    controller DSL 0
     mode atm
     line-term cpe
     line-mode 2-wire line-zero
     dsl-mode shdsl symmetric annex B
     line-rate auto
    !
    !
    !
    !
    interface BRI0
     no ip address
     no ip redirects
     no ip unreachables
     no ip proxy-arp
     encapsulation hdlc
     ip route-cache flow
     shutdown
    !
    interface ATM0
     no ip address
     no ip redirects
     no ip unreachables
     no ip proxy-arp
     ip route-cache flow
     no atm ilmi-keepalive
    !
    interface ATM0.1 point-to-point
     description $ES_WAN$$FW_OUTSIDE$
     pvc 8/35
      pppoe-client dial-pool-number 1
     !
    !
    interface FastEthernet0
    !
    interface FastEthernet1
    !
    interface FastEthernet2
    !
    interface FastEthernet3
    !
    interface Vlan1
     description Local Area
     ip address 11.11.11.11 255.255.255.0
     no ip redirects
     no ip unreachables
     no ip proxy-arp
     ip nat inside
     ip virtual-reassembly
     ip route-cache flow
     ip tcp adjust-mss 1412
    !
    interface Dialer0
     ip address negotiated
     no ip redirects
     no ip unreachables
     no ip proxy-arp
     ip mtu 1452
     ip nat outside
     ip virtual-reassembly
     encapsulation ppp
     ip route-cache flow
     dialer pool 1
     dialer-group 1
     no cdp enable
     ppp authentication pap callin
     ppp pap sent-username xxxxxx@ttnet password 7 xxxxxxx
    !
    ip classless
    ip route 0.0.0.0 0.0.0.0 Dialer0
    !
    ip http server
    ip http authentication local
    ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip nat inside source list 1 interface Dialer0 overload
    !
    logging trap debugging
    access-list 1 remark INSIDE_IF=Vlan1
    access-list 1 remark SDM_ACL Category=2
    access-list 1 permit 11.11.11.0 0.0.0.255
    dialer-list 1 protocol ip permit
    no cdp run
    !
    control-plane
    !
    banner login ^CAuthorized access only!
     Disconnect IMMEDIATELY if you are not an authorized user!^C
    !
    line con 0
     login
     no modem enable
     transport output telnet
    line aux 0
     login local
     transport output telnet
    line vty 0 4
     privilege level 15
     login local
     transport input telnet ssh
    !
    scheduler max-task-time 5000
    scheduler allocate 4000 1000
    scheduler interval 500
    end

     

    Port Forward  icinde asagidaki satiri ilgili portu yazarak calistirabilirsin .

     ip nat inside source static tcp 11.11.11.12 3389 interface Dialer0 3389

     

     


    MCP
    CCNA , HP ASP , HP APS
  •  04-10-2008, 11:03 11439 Cevap 11200

    Cevap : Cisco 878 K-9 Port Forwarding on GHSDSL..!

    Teşekkürler..! :D
  •  04-10-2008, 17:36 11594 Cevap 11439

    Cevap : Cisco 878 K-9 Port Forwarding on GHSDSL..!

    isini gorduyse ne mutlu :)
    MCP
    CCNA , HP ASP , HP APS
RSS haberlerini XML olarak görüntüle